Cisco Firepower 1010 Basic Configuration
This post shows a basic configuration step for a HA setup of two Firepower 1010.
Diagram
Port 1 = WAN Port (DHCP Client)
Port 2 -8 = LAN Ports - 192.168.175.x
Port 7-8 = PoE Ports
Mgmt Port = DHCP Client / Manual Assign
Default login: admin / Admin
Configuration Overview
Pre-Configuration |
Install the firewall. See the hardware installation guide. |
|
Pre-Configuration |
||
Pre-Configuration |
||
Pre-Configuration |
||
CLI |
||
CLI or Device Manager |
||
Management Center |
||
Cisco Commerce Workspace |
Obtain Licenses for the Management Center: Buy feature licenses. |
|
Smart Software Manager |
Obtain Licenses for the Management Center: Generate a license token for the management center. |
|
Management Center |
Obtain Licenses for the Management Center: Register the management center with the Smart Licensing server. |
|
Management Center |
||
Management Center |
Basic Configuration
Cable Connections:
Interface configuration
- WAN (0/0)
- LAN (0/1)
- Others (0/2 - 0/6)
- Mgmt Interface
You can put Mgmt interface into a different network, or you can directly hook it up into your local LAN network.That is depending on your network architecture.
Default Route configuration
Vlan configuration
HA Configuration
https://www.youtube.com/watch?v=HY_rHkaEq30
Cable Connections
Failover link: - 172.16.40.1/30 172.16.40.1.2/30
Stateful link:172.16.50.1/30 172.16.50.2/30
LED light will show which one is active (green) and which one is passive (amber)
Interface configuration:
WAN - Active IP, Passive IP
LAN - Active IP, Passive IP
Videos
共有 0 条评论