FortiClient Advanced Features (Idle-timeout, auth-timeout, Auto Connect, Always Up, etc)

SSL VPN Types

There are two major types of SSL VPNs:

SSL Portal VPN

In this type of SSL VPN, a user visits a website and enters credentials to initiate a secure connection. The SSL portal VPN allows for a single SSL connection to a website. Additionally, the user can access a variety of specific applications or private network services as defined by the organization.

Users can typically enter the gateway, or the hardware on a network that allows data to flow from one network to another, using any modern web browser, by entering the username and password provided by the VPN gateway service.

SSL Tunnel VPN

An SSL tunnel VPN allows a web browser to securely access multiple network services that are not just web-based via a tunnel that is under SSL. These services could be proprietary networks or software built for corporate use only that cannot be accessed directly via the internet. This VPN tunneling technology may require a browser with additional applications, such as JavaScript or Flash, installed to display active content.

SSL-VPN Web and Tunnel Mode

Notes: https://video.fortinet.com/products/fortigate/5.4/cookbook-ssl-vpn-web-and-tunnel-mode-5-4#:~:text=Web%20Mode%20allows%20users%20to,FortiGate's%20security%20policies%20and%20profiles.

Basically, Web Mode is the mode your vpn user can use browser to access those internal or internet resources.

Tunnel mode, is the mode your vpn users use FortiClient to access internal or internet resources.

FGT # get vpn ssl monitor SSL-VPN Login Users: |Index|User|Group|Auth Type|Idle-Timeout|Auth-Timeout|From|HTTP in/out|HTTPS in/out|Two-factor Auth| |0|Vla|Remote Users|1(1)|272|20884|5.17.102.10|0/0|0/0|0| |1|And|Remote Users|1(1)|296|24733|5.17.102.10|0/0|0/0|0| |2|Jos|Remote Users|1(1)|296|25470|5.17.102.10|0/0|0/0|0| SSL-VPN sessions: |Index|User|Group|Source IP|Duration|I/O Bytes|Tunnel/Dest IP| |0|VldKioSoft|Remote Users|5.17.102.10|7917|867941/2664146|10.212.134.200| |1|And|Remote Users|5.17.102.10|4067|418632/1082959|10.212.134.201| |2|Jos|Remote Users|5.17.102.10|3331|143730/11424|10.212.134.202| 

SSL-VPN Web Mode and Bookmarks

Bookmark is the shortcut for internal resources. 

Edit full-access portal. 

The legacy SSL-VPN web mode feature is disabled globally. Web mode will not be accessible in portals.

SSL VPN connection logout after 8 hours : auth-timeout, idle-timeout

Idle timeout means if there is no data being sent or received over VPN, the connection will drop. What you are talking about seems to be authentication timeout or auth-timeout. By default it is 8 hours in fortigate firewall. You can extend it till 72 Hours (259200 seconds).

By default, an SSL VPN connection logs out after 8 hours:

 

config vpn ssl settings

    set auth-timeout 28800

end

The auth-timeout is the period of time in seconds that the SSL-VPN will wait before re-authentication is enforced.
The default value is 28800 seconds (8 hours). The value can be between <0> to <259200>

A value of 0 indicates no timeout.

 

Adjust the idle-timeout period of time in seconds that the SSL-VPN will wait before timing out the user if not being active.

 

config vpn ssl settings

    set idle-timeout 300

end

 

The default value is 300 seconds (5 minutes). The value can be between <0> to <259200>.

Note: 

• https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-connection-logout-after-8-hours/ta-p/191322
• https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-timers-explanation-and-SSL-VPN-Login/ta-p/203615

Advanced Features: Auto Connect, Always Up

This feature is unavailable in free versions of FortiClient. You can upgrade to the full version of FortiClient to access this feature. Contact sales to upgrade.

Feature	Description
Save Password	Allows the user to save the VPN connection password in FortiClient
Auto Connect	When FortiClient launches, the VPN connection automatically connects. Automatic connection to the VPN tunnel may fail if the endpoint boots up with a user profile set to automatic logon. See Appendix E - VPN autoconnect for configuration examples.
Always Up (Keep Alive)	When selected, the VPN connection is always up. If the connection fails, possibly due to network errors, FortiClient attempts to reconnect. If credentials (username and password) are saved, FortiClient attempts to reconnect silently. If credentials are insufficient (for instance, multifactor authentication is required or password is not saved), FortiClient prompts for credentials.

 Those 3 tick boxes only seem to appear once you've connected to the VPN for the first time. If you've not connected, do that then disconnect and the tick boxes appear after that.

Note:

The following features are not supported in the FortiClient v6.2.X - v7.0.12, v7.2.X and v7.4.X free versions:

• VPN auto-connect/always-up.
• VPN before logon.
• On-net/off-net.
• Host check features.
• Central management
• No feedback option & no diagnostic tool under help/info page.
• IKEv2 is not supported on FortiClient 6.2.x free version.
• TAC support.

Note: https://community.fortinet.com/t5/FortiClient/Technical-Tip-FortiClient-EMS-Auto-connect-a-VPN-Tunnel/ta-p/195552

Get a free version 6.0.10, those three options are free to use still.